Owon SDS Series User Manual download pdf (Page 75)

5.Advanced User Guidebook

How to Measure Automatically

Press the Measure button to display the menu for the settings of the Automatic

Measurements.

The oscilloscopes provide 24 parameters for auto measurement, including Vpp,

Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period,

Rise Time, Fall Time, Delay A→B , Delay A→B ,+Width, -Width, +Duty, -Duty,

Cycle rms, Cursor rms, Duty cycle, Phase.

The menu is displayed as Figure 5-48.

Figure 5-66 Measure Menu

The "Automatic Measurements" menu is described as the following table:

Function Menu

Setting

Description

Add

Type

Press F1 ,show the measure types

Source

CH1

Select the source

CH2

Show all

Show all the measures on the screen

Add

Add the selected measure types (shown

at the left bottom, you could only add 8

types at most)

Remove

Remove all

Remove all the measures

Type

Turn the M knob, select the types need

to be deleted.

Remove

Remove the chosen measure type

Measure

The measured values can be detected on each channel simultaneously. Only if the

waveform channel is in the ON state, the measurement can be performed. The

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 108 109

No comments

Owon SDS Series User Manual Page 75